Ways to solve common vacuum cleaner problems

If you own a vacuum cleaner, it is important to know some ways to solve common vacuum cleaner problems.

As much as vacuuming is a chore, it makes a home appealing and attractive to live in. It is a crucial activity to ensure cleanliness and freshness in your home. However, sometimes you may find that your vacuum cleaner has stopped working.

Your vacuum cleaner isn't working? Read on to learn more about common vacuum cleaner problems and the different solutions.

Common vacuum cleaner problems

Low suction power

Low suction is a fairly common vacuum cleaner problem. If your vacuum cleaner has low suction pressure, it will become less effective. You may spend a lot of time vacuuming a single spot and still not get the effectiveness you normally get with normal suction.

There are several problems that cause low suction power in a vacuum cleaner. These are:

• Clogged filter - Vacuum cleaner filters are masters at catching and retaining dust and dirt particles as well as pet hair from surfaces to prevent them from being released back into the air. After a while, it is a good idea to clean the filter to remove these particles or fur. But what happens if you don't clean the filter for a long time? It affects the suction power. You can fix this by cleaning the filters or replacing them when they are worn out.
• Full Vacuum Bag - Often times, you may overlook a full vacuum bag as a cause of low suction. But it is actually one of the main causes of this problem. If you notice low suction, check to see if the bag is full and empty or replace it if necessary.
• Clogged floor head, throat or hose – Another common cause of low suction pressure in a vacuum cleaner is a clog, so make sure you check for blockages in any of these parts.
• Clogged Brush - Occasionally, the vacuum cleaner brush gets clogged with objects such as human hair and pet fur. The clog can affect the suction pressure and it is up to you to clean the brush to solve the problem. It is important to clean the brush regularly to avoid low suction and other problems that can arise from clogged brushes.

Excessive noise

There is a normal range of noise that your vacuum cleaner produces. Most of the time, the noise is minimal and just comfortable for the cleaner to handle. Sometimes, your vacuum cleaner may start producing louder and excessive noise.

So, is your vacuum cleaner making loud noises? There are several reasons that can cause this problem. Some of them include:

• Clogging - Your vacuum cleaner may be generating excessive noise due to blockages in the floor head, throat, or hose. Any blockage may force the vacuum cleaner to use excessive force to generate enough suction. This may result in the generation of excessive noise. To fix the problem, you will need to find the blockage and remove the materials to clean the area.
• Motor Problems – Another cause of excessive noise in a vacuum cleaner is problems with the motor. Such problems can be the result of detachments in the belt or hose. Any detachments will result in a noisy vacuum cleaner. If left unchecked, the vacuum cleaner may stop working. You can fix this problem by disassembling the vacuum to look for problems in the belt or hose. Reattach them properly to fix the noise problem.
• Air leaks – Just like clogs, air leaks cause the vacuum to use excessive force to maintain suction pressure. This can cause the cleaner to produce excessive noise. You can fix this by finding the spot with an air leak and replacing it. You can also seal the affected area.

Overheating

It is common for a vacuum cleaner to overheat, especially if it has been vacuuming for a long time without stopping. However, there are times when the cleaner may overheat to the point where it starts to emit hot air and smoke. The cause of this problem is a fault in the electrical system, specifically the motor. In cases of overheating, it is important to contact a professional rather than attempting DIY fixes. You should have the technician replace the motor system with a new one, and most likely, the overheating problem will be fixed.

Burning smell

The burning smell problem is another typical problem faced by vacuum cleaner owners. It is caused by a worn out motor belt. The burning smell can also be due to the rubber belt burning due to the loss of elasticity. All in all, the belt is worn out and needs to be replaced.

To fix the burning smell problem in a vacuum cleaner, you need to replace the motor belt. You can do this by disassembling the vacuum cleaner to get to the motor belt. After that, you should carefully remove the belt. Then you can gently clean any burnt rubber parts for the motor before replacing the old belt with a newer and tighter belt. Chances are, the burning smell problem will be fixed.

Vacuum cannot be switched on

A vacuum cleaner that won't turn on is one of the most frustrating problems you can ever deal with when vacuuming. However, it's an easy problem to fix. If your cleaner won't turn on, check its connection to the power source to see if it's working properly. For traditional vacuum cleaners, you can check to see if it's connected to the outlet properly. If not, you should plug the cleaner into the power source and test again.

For robot cleaners like the Dreame Robot Vacuum, you should check that the batteries are charged and properly connected. If they are not, you should charge the device to turn it on. If you have checked the power source and confirmed that it is properly connected, but the cleaner still does not turn on, it means that the device needs new parts or a complete replacement. For troubleshooting tips, consult the manufacturer's manual. If there is no manual, do not try DIY, contact a dealer or replace the vacuum cleaner.